Move, copy, rotate and repair contours

Select the intended geometry and inspect the preview before confirming a change.

1. Use M for move, Ctrl+Shift+C for copy, R for rotate, S for scale and O for offset; enter precise values in the parameter panel.
2. Ctrl-select two open entities and use J to join their nearest endpoints within the chosen tolerance. Ctrl+J closes the selected open polyline.
3. For fillet (F / FILLET), click the retained sides of two straight edges and enter a radius. For chamfer (CHA / CHAMFER), enter the first-edge setback and angle.
4. Use mirror or array tools for repeated geometry; select their entities explicitly in the tool list and check the total instance count.

This website provides instructions only. Carry out every drawing, transfer and machine operation in the installed software. Website links cannot home, jog, start, pause or stop a live machine.