Choose the cutting start and final lift point

F9 sets a contour-relative start/lift location for every instance of the same part type.

1. In Layout result press F9 or select the start-point tool.
2. Move near the target cutting contour: red means unsnapped; green means a contour point can be confirmed.
3. Click the intended point, recheck the current layout and generate its route to inspect the cutting sequence.
4. Use Shift+F9 to clear all manual start/lift assignments and return to automatic planning.

This website provides instructions only. Carry out every drawing, transfer and machine operation in the installed software. Website links cannot home, jog, start, pause or stop a live machine.