Main program production
The main program organises received layouts and production tasks, supervises equipment and displays real feedback. mCAD prepares layouts; the IMCMotionService motion service executes controller commands.
A complete production workflow
Follow the actual connection, referencing, material, task and production states.
02Connect and confirm readiness
Communication with IMCMotionService alone does not prove the controller and drives are ready.
03Whole-machine homing and Go to 0
Homing establishes the mechanical reference; Go to 0 moves to an already established mechanical zero.
04Set the material origin with H1
The H1 laser references the sheet after successful whole-machine homing.
05Receive or import saved .mhg layouts
A saved layout file is preparation data, before it becomes a production task.
06Add quantity and process mode; review estimates
The task record combines a saved layout with the required repetitions and current process settings.
07Arrange and run the production queue
The queue holds repeated machining tasks in the displayed order.
08Place material, scan the frame and start
Confirm the actual sheet and current task before any live movement.
09Monitor, pause, stop and clear faults
Actual feedback determines machining state and permitted continuation.
10Completed counts and restart persistence
A real completed machining cycle advances the task’s completed quantity.
11Live servo load and peak replay
Load curves come from actual drive torque feedback.
12Speed modes, backup and parameter export
Use verified material/process modes and keep a configuration backup before authorised changes.
13DI/DO diagnostics and tool-head downgrade
Diagnose the actual fault and distinguish a Z servo failure from an isolatable W/tool fault.
This website provides instructions only. Carry out every drawing, transfer and machine operation in the installed software. Website links cannot home, jog, start, pause or stop a live machine.