Set the material origin with H1

The H1 laser references the sheet after successful whole-machine homing.

1. Select H1 in the Manual debugging machine view after the machine is homed and all axes have stopped.
2. Use the installed JOG controls to put the H1 laser on the actual sheet origin.
3. Use Set origin — H1 laser = sheet (0,0), confirm requested X/Y dimensions and inspect the resulting sheet bounds.
4. Check the correct blade and each head’s stored Z work point, material thickness and process mode; replan after relevant changes.

This website provides instructions only. Carry out every drawing, transfer and machine operation in the installed software. Website links cannot home, jog, start, pause or stop a live machine.